1.Application:
METPRESS-5A Automatic Metallographic Specimen Mounting Press is a kind of full automatic mounting
press, equipped with in-out water cooling system.
It is suitable for the heat mounting (thermohardening & thermoplastic) for all kinds of materials.
After the parameters such as heating temperature, heat preserving time and applied force etc. are set
up, put the specimen and mounting material into the machine, close the cover and press the start
button,then the machine will finish the job automatically.
It is not necessary for the operator to be on duty.
According to different requirements of the material,there are four kinds of moulds that can be
chosen to meet the demands at will. Also it is available to prepare two pieces of specimens at the
same time, the capacity is doubled.
2.Technical Parameters:
|
MODEL |
METPRESS-5A |
|
Sample diameter |
Φ25mm,Φ30mm,Φ40mm,Φ50mm (Choose two) |
|
Heating temperature |
35-200℃ |
|
Hold Time |
1~99 min |
|
Automatic cooling time |
0~60 min |
|
Cooling method |
Water |
|
Power |
1650W |
|
Power supply |
Single phase AC 220V, 50Hz |
|
Dimension |
455× 475× 430 (mm) |
|
Net weight |
50kg |
|
Gross weight |
62kg |
